Installing a fire sprinkler at your home is the surest way to gain some peace of mind against fire outbreaks. An incident of fire outbreak can pose a severe threat to your property, lives and belongings. Hence it is a prudent measure to go for fire sprinkler system installation through an accomplished company. Here is how a fire sprinkler works.
Working mechanism of fire sprinklers
Home fire sprinklers have a network of piping that is filled with pressurized water. These are installed behind walls and ceilings. Individual sprinklers are fitted along the piping to protect the areas under them. Since the water is always there in the pipeline, fire sprinklers are ever ready to do their job. In the event of a fire breakout, the air temperature above the fire increases which activates the fire sprinkler. The sprinkler then sprays water forcibly on the flames extinguishing the fire completely in most cases of fire outbreaks. At least fire sprinklers can be banked on for controlling the heat and limiting the emission of toxic smoke until the arrival of the fire department to take charge of the situation.
Some useful points about fire sprinklers
• Only the sprinklers located very near to the fire are activated hence there is no risk of other areas getting wet through the sprinkled water.
• Smoke cannot activate the sprinklers therefore you need not worry that they will start operating during unwanted hours.
• Since sprinklers react so quickly, they are highly effective.
• As fire sprinklers can dramatically reduce the heat, flames and smoke, they can help minimise the risk of death or injury from fire. They give enough time for the occupants to evacuate the property during a fire outbreak.
• The fire sprinklers are configured to release typically around 10 to 25 gallons of water per minute. In homes without sprinklers, the fire is most likely to grow to dangerous proportions before the fire department arrives at the site.
• Fire sprinklers can control or extinguish the fire completely in homes before the fire department arrives. This can help prevent the property damage besides saving lives.
How are fire sprinklers installed
Fire sprinkler system installation is done by specially trained contractors who are supposed to follow the NFPA guidelines. The right time to plan for the installation of a fire sprinkler system is during the time of building or remodelling homes. Fire sprinklers cost about one to two percent of the cost of total home construction.
Comments
Post a Comment